MotoJug Hydration System for 1 Gallon Stainless Steel Jugs
Pleased be advised. We only make our Motojug Bags to fit the 1 Gallon Stainless Steel Jugs now like the 1 Gallon Ozark Trail Jug from Walmart or the RTIC 1 Gallon Stainless Steel Jug. It will also work with the Yeti 1 Gallon Jug but we don’t recommend it as it has a magnet in the lid making it almost impossible to drill your hole for the Hydration tubing into.
******* OUR BAGS NO LONGER WORK WITH A COLEMAN OR ANY OTHER PLASTIC 1 GALLON JUG WE HAVE GONE TO A STAINLESS STEEL SYSTEM ONLY******
This MotoJug Bag is specifically designed and built to fit 1 gallon Stainless Steel Jugs. All necessary tubing, and mounting equipment are included in purchase. (1 Gallon Stainless Steel Jug is not included in a MotoJug Hydration System Purchase)
Please be advised that all 1 gallon Stainless Steel Jugs will require you to drill a hole in the lid somewhere for the hydration tubing to enter the jug. This hole should be just smaller than the tubing to insure a tight fit for the hose. You don’t want the tubing loose in the hole at all. For me a 3/8” drill bit is perfect. I’d suggest trying on a scrap piece of plastic before drilling out your final hole to make sure your drill bit is the right size for your tubing. You’ll also need to create a vent because you’re system will be air tight and make it difficult to draw the water out of your jug. To do this simply just loosen your lid about half a turn or so from tight. This will be enough to make it easier for you to draw the water out of your jug. If you need further assistance you can contact me at (435)767-8706
See purchase details below.
Warranty: MotoJug Hydration system will warranty our product for 30 Days against manufacture defects. Abuse, crashes and excessive wear are “NOT” covered. We will do our best to make it right with you if you have an issue but holes in fabric from rubbing on you’re bike is not a manufacture defect.
****** Stainless Steel 1 Gallon Jug is not included******
What comes with your MotoJug Hydration System
1. MotoJug Bag (Footpeg or Floorboard mount specific. Choose at checkout)
2. 5ft of Hydration tubing with cover
3. Hydration tubing quick disconnect
4. 45 degree Elbow where tubing exits the 1 gallon Jug
5. Silicone Bite Valve for end of Hydration Tubing
6. Lanyard for hydration tubing
7. 2 3ft straps to secure your system to your bike.
8. Clear contact paper pieces that you can put on your bike where the system might come into contact with your Bike and rub the paint. This does not have to be used but one of my customers gave me the idea and he said it works well. I personally don’t use it.
1 Gallon Stainless Steel Jug Not Included In Purchase
This MotoJug Hydration System Bag is built specifically for 1 Gallon Stainless Steel Jugs like the Ozark Trail, RTIC and YETI.